Siemens PLM NX v8.5.2 (Linux) MP02 Update :8.December.2013
Siemens PLM NX v8.5.2 (Linux) MP02 Update
Siemens PLM NX v8.5.2 (Linux) MP02 Update | 464MB
Maintenance Pack (MP) extends the capabilities of the software solutions Siemens PLM Software NX 8.5.2 and fixes pesky bugs from previous releases and enables a customer to receive fixes for urgent problems, without having to wait for the next service pack.
Maintenance Pack 02 for NX 8.5.2:
The problem in Manufacturing Turning where the Feeds and Speeds unit type of Millimeters Per Revolution (MMPR) was not always retained in the operation settings when the operation was reopened is fixed.
The problem in Translators where UNC paths were not supported in the command line translator syntax is fixed.
The problem where updating some drawing views caused errors is fixed.
Note: To repair affected parts perform Part Cleanup with Clean Feature Data option.
The problem in Drafting where the incorrect layers were visible in 'Smart Lightweight' and 'Exact' views, when using 'Layer Visible in View' is fixed.
The problem in Assemblies where expanding wave links in the Relations Browser was slow is improved.
The problem where the Part Navigator behaved incorrectly when switching from Modeling to Drafting and back is fixed.
The problem in Drafting where some dimensions in the Exact View lost associativity after Component Replacement is fixed.
The problem in Drafting where in some cases the creation of a projected view was slow is improved.
The problem in Assemblies where a WAVE link did not transfer the feature name is fixed.
The problem in Assemblies where the extracted body in some cases inherited the wrong name for output is fixed.
The problem in Translators where the DXFDWG translator failed when there were more than 20 directories specified in the def file is fixed.
The problem in Knowledge Fusion where a formula in Vehicle Design Automation ->Vehicle Architecture -> BaseData input field was lost and a constant value was used instead is fixed.
The problem in Progressive Die Wizard where a die base could not be cloned is fixed.
The problem in Drafting where an angular dimension on a 2D centerline did not update correctly is fixed.
The problem in Electrode Design where the Electrode Blank command did not populate the Part Name Management list in Teamcenter mode is fixed.
The problem in Drafting where saving some drawings caused slow performance is improved.
The problem in Mold Wizard where an electrode blank could not be created with user defined material and data is fixed.
The problem in Teamcenter Integration for NX where updating a Part Family Member Template failed when the Multiple Revs switch was On in Customer Defaults is fixed.
The problem where some Assemblies failed to load with the warning The attribute corresponding to an attribute handle cannot be located is fixed.
The problem where the value of a reference attribute was not displayed in a note is fixed.
The problem in Drafting where legacy Centerlines moved is fixed.
The problem in Assemblies where the performance creating a WAVE link to a body or point was sometimes slow is fixed.
The problem in Advanced Simulation where the CBUSH element output to an Excel spreadsheet and Information window was incorrect is fixed.
The problem where it was not possible to delete some expressions which were associated with attributes on objects that had been deleted is fixed.
The problem where loading some assemblies caused an Attribute Units Invalid error is fixed.
The problem where some legacy assemblies failed to open due to part conversion errors is fixed.
The problem where some legacy assemblies failed to open due to an update/delete loop issue is fixed.
The problem where fully loading Jt derived parts referenced when transient caused an error is fixed.
The problem where loading a part with Partial Loading off caused the system to be unresponsive is fixed.
The problem in Weld Assistant where an NX Open API was not available to determine which components were being welded together by a given Weld Joint feature is fixed.
Note: a new method GetConnectedParts has been added to the WeldJointBuilder class.
The problem in Drafting where a distance tolerance was changed on import of DXF/DWG files with polylines is fixed.
The problem where deleting and assigning attributes to some occurrence objects caused an error is fixed.
The problem in Weld Assistant where Show Connected Lines for some ArcWelds was incorrect in Structure Manager is fixed.
The problem in Progressive Die Wizard where the Strip Layout command in PDW created incorrect station when using Insert Process Station After is fixed.
Note: each successive MP is comprehensive and contains the material from the earlier MP for that Release, as well as all Interim Fixes made available since the previous MP or full Release. In other words, when multiple MP are available, you would not need to apply MP01 before applying MP02.
About Siemens PLM Software
Siemens PLM Software Division Department of Siemens Industry Automation German company Siemens AG - one of the leading suppliers of software and services for product lifecycle management (PLM). The company has six million licensed seats, more than 59,000 companies worldwide The head office is located in Plano, Texas. Siemens PLM NX system 7 includes an integrated suite of CAD/CAM/CAE applications and displays a new level of effectiveness of the concept of the product development process through the visual medium High Definition PLM. Siemens PLM NX 7 uses all the advantages of High Definition PLM technology to improve Decision-making processes during product development.
Name: Siemens PLM
Version: NX 8.5.2 MP02 Update
Home: www.plm.automation.siemens.com
Interface: multilanguage
OS: Linux
System Requirements: To install it you need Siemens PLM NX 8.5.2 with SSQ's crack to be preinstalled
Buy a premium to download file with fast speed
Rapidgator.net
Siemens PLM NX v8.5.2 (Linux) MP02 Update | 464MB
Maintenance Pack (MP) extends the capabilities of the software solutions Siemens PLM Software NX 8.5.2 and fixes pesky bugs from previous releases and enables a customer to receive fixes for urgent problems, without having to wait for the next service pack.
Maintenance Pack 02 for NX 8.5.2:
The problem in Manufacturing Turning where the Feeds and Speeds unit type of Millimeters Per Revolution (MMPR) was not always retained in the operation settings when the operation was reopened is fixed.
The problem in Translators where UNC paths were not supported in the command line translator syntax is fixed.
The problem where updating some drawing views caused errors is fixed.
Note: To repair affected parts perform Part Cleanup with Clean Feature Data option.
The problem in Drafting where the incorrect layers were visible in 'Smart Lightweight' and 'Exact' views, when using 'Layer Visible in View' is fixed.
The problem in Assemblies where expanding wave links in the Relations Browser was slow is improved.
The problem where the Part Navigator behaved incorrectly when switching from Modeling to Drafting and back is fixed.
The problem in Drafting where some dimensions in the Exact View lost associativity after Component Replacement is fixed.
The problem in Drafting where in some cases the creation of a projected view was slow is improved.
The problem in Assemblies where a WAVE link did not transfer the feature name is fixed.
The problem in Assemblies where the extracted body in some cases inherited the wrong name for output is fixed.
The problem in Translators where the DXFDWG translator failed when there were more than 20 directories specified in the def file is fixed.
The problem in Knowledge Fusion where a formula in Vehicle Design Automation ->Vehicle Architecture -> BaseData input field was lost and a constant value was used instead is fixed.
The problem in Progressive Die Wizard where a die base could not be cloned is fixed.
The problem in Drafting where an angular dimension on a 2D centerline did not update correctly is fixed.
The problem in Electrode Design where the Electrode Blank command did not populate the Part Name Management list in Teamcenter mode is fixed.
The problem in Drafting where saving some drawings caused slow performance is improved.
The problem in Mold Wizard where an electrode blank could not be created with user defined material and data is fixed.
The problem in Teamcenter Integration for NX where updating a Part Family Member Template failed when the Multiple Revs switch was On in Customer Defaults is fixed.
The problem where some Assemblies failed to load with the warning The attribute corresponding to an attribute handle cannot be located is fixed.
The problem where the value of a reference attribute was not displayed in a note is fixed.
The problem in Drafting where legacy Centerlines moved is fixed.
The problem in Assemblies where the performance creating a WAVE link to a body or point was sometimes slow is fixed.
The problem in Advanced Simulation where the CBUSH element output to an Excel spreadsheet and Information window was incorrect is fixed.
The problem where it was not possible to delete some expressions which were associated with attributes on objects that had been deleted is fixed.
The problem where loading some assemblies caused an Attribute Units Invalid error is fixed.
The problem where some legacy assemblies failed to open due to part conversion errors is fixed.
The problem where some legacy assemblies failed to open due to an update/delete loop issue is fixed.
The problem where fully loading Jt derived parts referenced when transient caused an error is fixed.
The problem where loading a part with Partial Loading off caused the system to be unresponsive is fixed.
The problem in Weld Assistant where an NX Open API was not available to determine which components were being welded together by a given Weld Joint feature is fixed.
Note: a new method GetConnectedParts has been added to the WeldJointBuilder class.
The problem in Drafting where a distance tolerance was changed on import of DXF/DWG files with polylines is fixed.
The problem where deleting and assigning attributes to some occurrence objects caused an error is fixed.
The problem in Weld Assistant where Show Connected Lines for some ArcWelds was incorrect in Structure Manager is fixed.
The problem in Progressive Die Wizard where the Strip Layout command in PDW created incorrect station when using Insert Process Station After is fixed.
Note: each successive MP is comprehensive and contains the material from the earlier MP for that Release, as well as all Interim Fixes made available since the previous MP or full Release. In other words, when multiple MP are available, you would not need to apply MP01 before applying MP02.
About Siemens PLM Software
Siemens PLM Software Division Department of Siemens Industry Automation German company Siemens AG - one of the leading suppliers of software and services for product lifecycle management (PLM). The company has six million licensed seats, more than 59,000 companies worldwide The head office is located in Plano, Texas. Siemens PLM NX system 7 includes an integrated suite of CAD/CAM/CAE applications and displays a new level of effectiveness of the concept of the product development process through the visual medium High Definition PLM. Siemens PLM NX 7 uses all the advantages of High Definition PLM technology to improve Decision-making processes during product development.
Name: Siemens PLM
Version: NX 8.5.2 MP02 Update
Home: www.plm.automation.siemens.com
Interface: multilanguage
OS: Linux
System Requirements: To install it you need Siemens PLM NX 8.5.2 with SSQ's crack to be preinstalled
Buy a premium to download file with fast speed
Rapidgator.net
http:///file/c719699224001e3187a620918c9a99fc/Siemens.PLM.NX.8.5.2.Linux_Snorgared.rar.html